70-695合格率,70-695勉強方法,70-695学習分野,70-695過去問,70-695テキスト

KilltestのMCSE認定資格レベル 70-695試験の過去問を使用して、MCSE関する知識を習得でき、受験者は問題と答えを暗記しただけで、気楽に一発挑戦で70-695試験に合格する事を保証できます。MicrosoftMCSE資格70-695試験問題の的中率とても高いで、各試験の出題を分析および調査を行うことで、KilltestのDeploying Windows Desktops and Enterprise Applications問題集は一番適当な価格で提供します。Killtestは勉強者が高い品質の70-695試験の参考書を提供するために心をこめて、 MCSE70-695試験の最情報を完成した70-695試験の模擬問題集です。

Microsoftの70-695試験参考書はIT業界の中でとても普遍的な試験になります。試験の準備は時間とエネルギーがかかります。時は金なり社会に時間を無駄しないようによいツルを探し出されるのはみんなの希望です。KilltestのMicrosoftの70-695試験参考書の問題集は勉強者の一番短いだけかかりますよ。Microsoftの70-695試験参考書がIT業界には極めて重要な地位があるがよく分かりましょう。試験に合格するのは簡単ではないもよくわかりましょう。Killtestはこの問題を着々解決できますよ。IT専門家がMicrosoftの70-695試験参考書に関する特別な問題集を開発しています。それをもって、試験は問題になりませんよ。
Share some MCSE 70-695 exam questions and answers below.
HOTSPOT

You need to prepare Server1.

What should you do? To answer, configure the appropriate options in the answer area.

Answer:

You have a Windows Deployment Services (WDS) server. You have a custom install image of Windows 8.1 Enterprise named Image1. The image is in an image group named ImageGroup1 and is the only image in the group. You need to ensure that only users who are the members of a security group named Admins can deploy Image1 by using PXE. What should you use?

A. the Deny-WdsClient cmdlet and the RequestID parameter

B. the Set-WdsClient cmdlet and the Group parameter

C. the Set-WdslnstallImage cmdlet and the UserFilter parameter

D. the Approve-WdsClient cmdlet and the RequestID parameter

Answer: C

You have a server named Server1 that runs Windows Server 2012 R2 server. You deploy a Microsoft System Center 2012 R2 Configuration Manager site server to Server1. You need to ensure that Server1 can support Zero Touch Installation (ZTI) deployments. The deployments must minimize the amount of network bandwidth used. Which two actions should you perform? Each correct answer presents part of the solution.

A. From Server Manager, install the Windows Deployment Services server role.

B. From the Windows Deployment Services console, configure the PXE Response settings.

C. From the Configuration Manager console, add the distribution point site system role.

D. From the Configuration Manager console, enable multicast on Server1.

E. From the Configuration Manager console, enable PXE support for the clients on Server1.

Answer: C,E

In Sources.wim, you have a Windows 8.1 image named Image1. You have an application named App1.exe. App1.exe is a self-contained application that does not require installation. You mount Image1. You need to add Appl.exe to Image1. What should you run first?

A. Add-ProvisionedAppxPackage and the Path and FolderPath parameters

B. imagex.exe and the Append and Config parameters

C. dism.exe and the Image and AddPackage parameters

D. Copy-Item and the Path and Destination parameters

Answer: D

You need to recommend which services must be deployed to the training network for the operationsystem deployment.

What should you include in the recommendation?

A. MDT

B. a DHCP relay agent

C. an IP Address Management (IPAM) server

D. a DNS server

Answer: B

HOTSPOT

You need to identify the minimum number of images required to meet the image requirements forFabrikam.

How many images should you identify? To answer, select the appropriate number of images for eachoperating system in the answer area.

Answer:

You have a client computer that has Microsoft Office 2013 installed. You need to identify whether Office 2013 is activated. Which command should you run?

A. ospp.vbs /dstatus

B. ospp.vbs /dhistoryacterr

C. ospp.vbs /remhst

D. ospp.vbs /dcmid

Answer: A

Your network contains one Active Directory forest named contoso.com. The forest has a deployment of Microsoft System Center 2012 R2 Configuration Manager. You plan to add a server named Server1 as a distribution point. Server1 will be used only by client computers on the internal network that run Windows 8.1 Enterprise. The Windows Deployment Services server role will NOT be installed on Server1. You need to identify which firewall port on Server1 must be open to ensure that Configuration Manager clients can download application packages from Server1. Which TCP port should you identify?

A. 53

B. 8080

C. 443

D. 636

Answer: C

Topic 1, Contoso, Ltd

Case Study:

Overview

Contoso, Ltd. is a private corporation that has 2,000 employees.

The company has a main office and several branch offices. The main office is located in

Houston. The branch offices are located throughout the United States.

Each office has a reliable and fast Internet connection.

Existing Environment

Active Directory

The network contains one production Active Directory forest named contoso.com and one test ActiveDirectory forest named test.contoso.com. All servers run Windows Server 2012 R2.

Existing Infrastructure

The company has a production network and atest network, which are isolated from one another. Theproduction network contains 2,000 client computers. The test network contains 50 client computers. Theclient computers on both networks run either Windows 7 Pro, Windows 8 Enterprise, or Windows 8.1Enterprise.

The production network includes the following:

.The Key Management Service (KMS)

.Two domain controllers in each office

.Microsoft System Center 2012 R2 Orchestrator

.Microsoft System Center 2012 R2 Configuration Manager

.A member servernamed Server1 that is located in the main office

.Two DHCP servers that lease IP addresses from the 10.10.0.0/16 address space and are configured forfailover

The test network includes following:

.Two domain controllers

. The User State Migration Tool(USMT)

. The Microsoft Deployment Toolkit (MDT)

. A DHCP server that leases IP addresses from the 10.12.0.0/16 address space

. A member server named Server2 that has the Windows Deployment Services server role installed

. The Microsoft Assessment andPlanning (MAP) Toolkit that is configured to have an existing inventorydatabase

An application named App1 is deployed to the client computers on the test network. All of the client computers on the test network have an Application Compatibility Manager (ACM) runtime-analysis package installed. Zero Touch Installation (ZTI) is used on the production network. Lite Touch Installation (LTI) is used on the test network. The client computers on the test network are deployed from Server2. An image named Image1 in an image group named Group1 is used for the deployment of client computers. The client computers on the production network are activated by using either Active Directory-Based Activation (ADBA) or KMS.

The company has kiosk computers that run Windows8.1 Enterprise. The kiosk computers are located onan isolated network segment that has access to the Internet only. The kiosk computers are configured tohave a static IP address and to use an external DNS server. All of the kiosk computers use drive letter Ffor removable media devices. The computers are reinstalled every six months. Currently, the installationis performed manually.

Problem Statements

Contoso identifies the following issues on the network:

. An administrator fails to deploy a set ofnew client computers to the production network by using a ZeroTouch deployment. The administrator receives an error message indicating that there is a missingnetwork card driver.

. App1 fails to run on Windows 8.1 Enterprise computers.

Requirements

Planned Changes

Contoso plans to implement the following changes to the network:

. Create a training network. The training network will use a separate segment on the test network and willuse the 172.16.10.0/24 address space. The client computers on thetraining network will be deployed byusing Windows Deployment Services (WDS).

. Upgrade the client computers that run Windows 7 and Windows 8 Enterprise to Windows 8.1 Enterprise.

. Deploy App1 to all of the client computers.

Technical Requirements

Contoso identifies the following technical requirements:

. From Server1, Windows 8.1 Enterprise must be deployed to the client computers in themain office.

. LTI of the client computers on the test network must start when five client computers are ready to be deployed.

. LTI of the kiosk computers must be performed by using removable media, and the kiosk computers must be activated.

. The User Driven Installation Replace Task Sequence template must be used when creating task sequences to upgrade the Windows client computers on the production network.

. All of the user state data that is stored on servers during a computer upgrade must be encrypted.

DRAG DROP

You need to identify which issue prevents App1 from running.

Which four actions should you perform in sequence? To answer, move the appropriate actions from thelist of actions to the answer area and arrange them in the correct order.

Answer:

After the planned migration, you need to gather data from the client computers on the Contoso network.

Which is the best account to use to achieve the goal? More than one answer choice may achieve the goal.Select the BEST answer.

A. Fabrikam\Administrator

B. Contoso\Administrator

C. Fabrikam\User2

D. Fabrikam\User1

Answer: C

多くの人々にとって、アクメパケットの質問ダンプは非常に魅力的でアクメパケット実際の試験のためのアクメパケット試験問題を取得する最も簡単な方法と思われます。それは、簡単な方法のようにしないに見えますか？覚えておいてください。それはアクメパケット著作権法に違反するとして、アクメパケット70-695試験過去問を使用することは違法です。しかし、ただ暗記して良い結果を与えることはありませんと、すべてのアクメパケット試験の質問と回答を詰め込むしようとしないでください。最善の解決策は、KilltestMicrosoftのMCSE認定資格70-695試験過去問を試してみることです。