Share some CCIE 400-101 exam questions and answers below. Refer to the Exhibit.
Which traffic gets set to AF41 by the marking policy on interface GigabitEthernet0/0?
A. Only traffic matching access-list streaming
B. Any traffic matching access-list tp-rooms and access-list streaming
C. Only traffic matching access-list tp-rooms
D. No traffic gets set to AF41
Answer: B
Which data plane protocol does EIGRP Over the Top use?
A. MPLS
B. GRE
C. LISP
D. IP-in-IP
Answer: C
Which TCP features allows a client to request a specific packet that was lost?
A. flow control
B. sliding window
C. fast recovery
D. selective acknowledgment
Answer: D
Which value does VPLS use to make forwarding decisions?
A. Source IP address of the packet
B. Source MAC of the Ethernet frame
C. Destination IP address of the packet
D. Destination MAC of the Ethernet frame
Answer: D
Refer to the Exhibit.
Which tag is applied to route 10.10.50.0/24?
A. 30
B. 20
C. 10
D. 40
Answer: D
受験者は筆記試験に合格した後、対応するハンズオンラボCCIE Routing and Switching Written Exam試験に合格する必要があります。CCIE認定資格400-101試験のブループリントに掲載されているトピックについて深い理解を有していることが望ましく、数年の実務経験を経てから受験することを強く推奨します。KilltestCCIE認定資格400-101試験は、企業における信頼性の高いセキュリティシステムを配備管理するために必要な知識とスキルを、技術者に取得してもらうことを目的としています。Killtest 400-101試験では、CCIE認定を構成するために必要なスキルを検証します。400-101試験はトランザクションとそこで生成されるデータに対し、可視性と信頼性を得ることができます。
Killtestは最新の400-101試験過去問を提供します。Killtestの400-101試験過去問テストエンジンと400-101試験過去問はあなたが一回で試験に合格するのを助けることができます。高品質のCCIE Routing and Switching Written Examトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。お客様に自分に一番ふさわしいCiscoの400-101試験過去問の復習方式を提供するために、我々はCiscoの400-101試験過去問の2つのバーションを提供します。あなたの試験準備にヘルプを提供するのは常にあります。すべてのバーションは無料のデモを提供します。そのほかに、どのバーションでも全面的で最新版のCCIE資格の400-101試験過去問の資料を提供します。
Killtestが提供した研修ツールはCiscoのCCIE資格認定試験に向けて学習資料やシミュレーション訓練宿題で、重要なのは試験に近い練習問題と解答を提供いたします。Killtest試験問題集を選ばれば短時間にITの知識を身につけることができて、高い点数をとられます。IT認証試験に関する知識を習得しなくてもCiscoの試験問題集だけで試験に合格することができます。どのようにCCIE認定資格400-101試験参考書をパスしますか?最も簡単な方法はKilltestの使用です。初心者としても弊社の問題集を利用して勉強するだけで、CCIE資格取得可能です。貴方の大切の時間と精力を節約できて、10~20時間の独学だけで、一発合格が可能です。CCIE Routing and Switching Written Exam試験参考書試験内容は簡単で、本物の認証試験問題と内容を体験することができます。 Share some CCIE 400-101 exam questions and answers below. Which utility can you use to identify the cause of a traffic -flow blockage between two devices in a network?
A. iWan application
B. ACL analysis tool in APIC-EM
C. ACL path analysis tool in APIC-EM
D. APIC-EM automation scheduler
Answer: C
Refer to the exhibit.
Which two conclusions can you draw from this output (choose two)
A. The device at the 192.168.5.119 routing table has an APR entry for the device at 10.9.132.254.
B. The packet was source-routed.
C. The device at 192.168.5.119 is on the same subnet as the next hop for the device at 10.9.132.254.
D. The device that produced the output uses different interfaces to send and receive traffic to and from the device at 10.9.132.254
E. The device that produced the output uses the same interface to send and receive traffic to and from the device at 10.9.132.254
Answer: C, E
Refer to the exhibit.
Which two statements about fine output are true? (Choose two)
A. BGP on RT1 has negotiated the BFD capability with its peer.
B. BFD is active on interface Gigabit Ethernet 0/3 and is using ICMP
C. BFD is active on interface Gigabit Ethernet 0/3 and is using UDP.
D. BFD last failed 476ms ago on interface Gigabit Ethernet 0/3.
E. BFD is active for BGP on RT1
Answer: A, E
Which two statements about the client -identifier in a DHCP pool are true? (Choose two)
A. It specifies a unique identifier that is used only for BOOTP requests.
B. It specifies a unique identifier that is used only for DHCP requests.
C. It requires that you specify the hardware protocol.
D. It is specified by appending 01 to the MAC address of a DHCP client.
E. It specifies a hardware address for the client.
Answer: B, D
Which two statements about IPsec VTIs are true? (Choose two)
A. Dynamic VTIs allow you to mix proxy types.
B. The dynamic VTI is a multipoint interface that can support multiple IPsec SAs.
C. The IKE SA can be bound to both the VTI and the crypto map in the router.
D. Static VTIs can use the "IP any any" traffic selector only.
E. The IPsec transform set must be configured in transport mode.
F. Static VTIs can encapsulate both IPv4 and IPv6 packets, but IPv4 can carry IPv4 packets and IPv6 can carry IPv6 packets.
Answer: C, D
Which two statements about DMVPN with NHRP are true? (Choose two)
A. NHRP shortens the configuration of the hub router.
B. NHRP dynamically provides information about the spoke routers to the hub.
C. NHRP disables multicast
D. The hub router uses NHRP to initiate the GRE tunnel with spokes.
E. The spoke routers act as the NHRP servers.
Answer: AB
Which set of commands conditionally advertises 172.16.0.0/24 as long as 10.10.10.10/32 is in the routing table?
A.
B.
C.
D.
Answer: C
Which information is contained in an OSPF Type 7 Not-So-Stubby Area NSSA External LSA?
A. The paths and costs to all OSPF NSSA areas that are external to the current area.
B. The path and costs to reach other stub area border routers in the OSPF routing domain.
C. The address of routers that connect the current area to other areas and the cost to reach those routers.
D. External network address, mask, and cost to reach each network that is external to the OSPF domain and only within the NSSA
E. The external network address, mask, and cost to reach networks that are external to the OSPF NSSA, including the default route.
Answer: D
CCIE資格はあなた自身のIT知識レベルを表すバロメータです。自分の力で勝ち取った資格は、必ずあなたの助けとなり、何らかの恩恵をもたらしてくれるはずです。ぜひ、果敢に挑んでくださいね。大勢IT資格業界の先輩からCCIE資格を準備することが多くの時間とエネルギーをかからなければなりません。もし訓練班とオンライン研修などのルートを通じないと試験に合格するのが比較的に難しい、一回に合格率非常に低いです。400-101試験参考書はもっとも頼られるトレーニングツールで、CCIE資格400-101試験参考書の実践テストソフトウェアを提供したり、CCIE資格の400-101試験参考書問題と解答もあって、最高で最新なCiscoの400-101試験参考書CCIE Routing and Switching Written Exam問題集も一年間に更新いたします。
Killtest最新の400-101試験情報を完成した模擬問題集です。CCIE認証400-101試験のために、一生懸命頑張ることと投資を出したのに、400-101試験が不合格の場合、失望の気持ちは存じております。Killtestは必須の400-101試験の参考書として業内で推奨されて、一年無料更新サービスを提供して、受験の前に400-101試験問題集の無料サンプルを体験して頂くことができます。初めてKilltestの400-101試験問題集を使用してから、CCIE認定CCIE Routing and Switching Written Exam試験問題集をパスするのに自信を持っています。Killtest400-101試験合格になって、CCIE認定資格を手に入れて、見事な仕事をできます。400-101試験の資格を取得するには、暗記ではなく、かなりの実務経験が必要です。
Share some CCIE 400-101 exam questions and answers below. Refer to the Exhibit.
Which tag is applied to route 10.10.50.0/24?
A. 30
B. 20
C. 10
D. 40
Answer: D
Which statement is true about LLDP?
A. LLDP provides VTP support.
B. LLDP does not use a multicast address to communicate.
C. LLDP can indicate only the duplex setting of a link, and not the speed capabilities.
D. LLDP does not support native VLAN indication.
Answer: D
Which set of commands conditionally advertises 172.16.0.0/24 as long as 10.10.10.10/32 is in the routing table?
A.
B.
C.
D.
Answer: C
Which option describes how a router responds if LSA throttling is configured and it receives the identical LSA before the interval is set?
A. The LSA is added to the OSPF database and a notification is sent to the sending router to slow down its LSA packet updates.
B. The LSA is added to the OSPF database.
C. The LSA is ignored.
D. The LSA is ignored and a notification is sent to the sending router to slow its LSA packet updates.
Answer: C
For which reason can two OSPF neighbor routers on the same LAN segment be stuck in the two-way state?
A. The two routers have different MTUs on the interface.
B. The two routers are configured with different priorities.
C. The interface priority is set to zero on both routers.
D. Both routers have the same OSPF router ID.
Answer: C
Refer to the exhibit.
When R2 attempted to copy a file from the TFTP server, it received this error message.
Which action can you take to correct the problem?
A. Configure the ip tftp source-interface Loopback0 command on R2.
B. Configure the ip tftp source-interface Fa0/1 command on R2.
C. Configure the ip tftp source-interface Fa0/1 command on R1.
D. Configure the ip tftp source-interface Loopback0 command on R1.
E. Change the access-list configuration on R1 to access-list 1 permit 172.16.1.0 0.0.0 255
Answer: E
Which option is the origin code when a route is redistributed into BGP?
A. IGP
B. incomplete
C. unknown
D. external
E. EGP
Answer: B
Which technology can be used to prevent flooding of IPv6 multicast traffic on a switch?
A. IGMP snooping
B. IGMP filtering
C. MLD snooping
D. MLD filtering
Answer: C
Refer to the Exhibit.
Which kind of ICMPv6 packet is shown in the output?
A. neighbor advertisement
B. neighbor solicitation
C. router discovery
D. time exceeded
E. router advertisement
Answer: B
Which value does VPLS use to make forwarding decisions?
最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社のCCIE Routing and Switching Written Exam資料を使って、98%に合格を保証いたします。もし合格しないと、われは全額で返金いたします。もし弊社のCiscoの400-101試験参考書認証試験について問題集に興味があったら、購入するまえにインターネットで弊社が提供した無料な部分問題集をダウンロードして、君の試験に役に立つかどうかのを自分が判断してください。それにKilltestは一年の無料な更新のサービスを提供いたします。 Share some CCIE 400-101 exam questions and answers below. Which utility can you use to identify the cause of a traffic -flow blockage between two devices in a network?
A. iWan application
B. ACL analysis tool in APIC-EM
C. ACL path analysis tool in APIC-EM
D. APIC-EM automation scheduler
Answer: C
Refer to the exhibit.
Which statement about the R1 multicast network environment is true?
A. RPF builds the topology using the unicast data for source address 10.1.108.10.
B. A static mroute configured to point multicast traffic for 10.30.30.32 through Ethernet 1/0.
C. RPF uses the OSPF 100 table for source address 10.1.108.10.
D. The default mroute uses Tunnel 10 as the exit interface for 10.1.108.10.
Answer: D
Refer to the exhibit.
You are configuring Router1 and Router2 for L2TPv3 tunneling.
Which two additional configurations are required to enable Router 1 and Router 2 to establish the tunnel? (Choose two)
A. Cisco Discovery Protocol must be enabled on interface FastEthernet 1/0 on Router 1
B. An IP address must be configured on interface FastEthernet 1/0 on Router 1
C. Cisco Express Forwarding must be disabled on Router 1
D. Loopback 0 on Router 1 must be advertised to Router 2
E. Router1 must be configured to encapsulate traffic by using L2TPv3 under the pseudowire-class R1toR2
Answer: D ,E
Which statement is true about LLDP?
A. LLDP provides VTP support.
B. LLDP does not use a multicast address to communicate.
C. LLDP can indicate only the duplex setting of a link, and not the speed capabilities.
D. LLDP does not support native VLAN indication.
Answer: D
Which statement about a Cisco APIC controller versus a more traditional SDN controller is true?
A. APIC uses a policy agent to translate policies into instructions.
B. APIC supports OpFlex as a Northbound protocol.
C. APIC does support a Southbound REST API
D. APIC uses an imperative model
Answer: A
Which TCP features allows a client to request a specific packet that was lost?
A. flow control
B. sliding window
C. fast recovery
D. selective acknowledgment
Answer: D
Which option describes how a router responds if LSA throttling is configured and it receives the identical LSA before the interval is set?
A. The LSA is added to the OSPF database and a notification is sent to the sending router to slow down its LSA packet updates.
B. The LSA is added to the OSPF database.
C. The LSA is ignored.
D. The LSA is ignored and a notification is sent to the sending router to slow its LSA packet updates.
Answer: C
Your network is suffering excessive output drops.Which two actions can you take to resolve the problem? (Choose two.)
A. Install a switch with larger buffers.
B. Configure a different queue set.
C. Reconfigure the switch buffers.
D. Configure the server application to use TCP.
E. Update the server operating system.
Answer: AB
勉強者はインターネットでCCIE認定の400-101試験過去問の練習問題と解答の試用版を無料でダウンロードしてください。そうしたら勉強者はKilltestが用意した問題集にもっと自信があります。早くKilltestの問題集を勉強者の手に入れましょう。Killtestは正確な選択を与えて、勉強者の悩みを減らして、もし早くてCCIE認定 CCIE Routing and Switching Written Exam試験過去問をとりたければ、早くてKilltestを注文してもいいんです。勉強者にとても良い指導を確保できて、試験に合格するのを助けって、Killtestからすぐに勉強者の通行証をとります。
あなたにとても良い指導を確保できて、試験に合格するのを助けって、Killtestからすぐにあなたの通行証をとります。Killtestが提供したCiscoのCCIE Routing and Switching Written Exam試験参考書を利用したら、Ciscoの400-101試験参考書に受かることはたやすくなります。Killtestがデザインしたトレーニングツールはあなたが一回で試験に合格することにヘルプを差し上げられます。KilltestのCiscoの400-101試験参考書トレーニング資料即ち問題と解答をダウンロードする限り、気楽に試験に受かることができるようになります。まだ困っていたら、我々の試用版を使ってみてください。
Share some CCIE 400-101 exam questions and answers below. What are two of the commands that you can enter to gracefully shut down OSPF and notify neighbors?(Choose two)
A. router(config-if)# ip ospf graceful shutdown
B. router(config-if)# ip ospf shutdown
C. router(config-router)# shutdown
D. router(config-router)# graceful shutdown
E. router(config)# ip notify
Answer: BC
Drag and Drop the NAT elements on the left into the correct sequential on the right?
Answer:
Which two statements about IPsec VTIs are true? (Choose two)
A. Dynamic VTIs allow you to mix proxy types.
B. The dynamic VTI is a multipoint interface that can support multiple IPsec SAs.
C. The IKE SA can be bound to both the VTI and the crypto map in the router.
D. Static VTIs can use the "IP any any" traffic selector only.
E. The IPsec transform set must be configured in transport mode.
F. Static VTIs can encapsulate both IPv4 and IPv6 packets, but IPv4 can carry IPv4 packets and IPv6 can carry IPv6 packets.
Answer: C, D
Which two statements about DMVPN with NHRP are true? (Choose two)
A. NHRP shortens the configuration of the hub router.
B. NHRP dynamically provides information about the spoke routers to the hub.
C. NHRP disables multicast
D. The hub router uses NHRP to initiate the GRE tunnel with spokes.
E. The spoke routers act as the NHRP servers.
Answer: AB
How does MSTP maintain compatibility with RSTP?
A. MSTP sends all spanning-tree information in one BPDU.
B. MSTP supports five port states in the same way as RSTP.
C. RSTP implements a TTL that is compatible with the MSTP max age timer.
D. RSTP encodes region information from an MSTP BPDU into a single instance.