70-412資格,70-412pdf,70-412exam

Killtestは提供した商品は勉強者の成功を全力で助けさしたげます。MicrosoftConfiguring Advanced Windows Server 2012 Services試験参考書を通ってからかなり人生の新しいマイレージカードがあるようで、仕事に大きく向上してIT業種のすべての方は持ちたいでしょう。多くの人はこんなに良いの認証試験を通ることが難しくて合格率はかなり低いと思っています。ちっとも努力しないと合格することが本当に難しいです。Microsoft 70-412試験参考書試験を通るのはかなり優れた専門知識が必要です。KilltestがMicrosoft70-412試験参考書を助けて通るのウエブサイトでございます。KilltestはMicrosoft 70-412試験に向かって問題集を開発しておって、勉強者のいい成績をとることを頑張ります。一目でわかる最新の出題傾向でわかりやすい解説、充実の補充問題などで買うことは一番お得ですよ。

Killtest Windows Server 2012資格の70-412試験問題集試験はあなたが上記の念願を実現することを助けられるのです。Killtest Windows Server 2012資格の70-412試験問題集試験は豊富な経験を持っているIT専門家が研究したもので、問題と解答が緊密に結んでいますから、比べるものがないです。Windows Server 2012資格の70-412試験問題集認定試験に受かったら、あなたの仕事はより良い保証を得て、将来のキャリアで、少なくともIT領域であなたの技能と知識は国際的に認知され、受け入れられるです。これも多くの人々がWindows Server 2012資格の70-412試験問題集を選ぶ理由の一つです。その理由でこの試験はますます重視されるになります。

Share some Windows Server 2012 70-412 exam questions and answers below.
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2. Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. You add two additional nodes in Cluster1. You have a folder named Folder1 on Server1 that hosts Application data. Folder1 is a folder target in a Distributed File System (DFS) namespace. You need to provide highly available access to Folder1. The solution must support DFS Replication to Folder1.

What should you configure?

A. Affinity-None

B. Affinity-Single

C. The cluster quorum settings

D. The failover settings

E. A file server for general use

F. The Handling priority

G. The host priority

H. Live migration

I. The possible owner

J. The preferred owner

K. Quick migration

L. The Scale-Out File Server

Answer: E

Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and childl.contoso.com. The domains contain three domain controllers.

The domain controllers are configured as shown in the following table.

You need to ensure that the KDC support for claims, compound authentication, and kerberos armoring setting is enforced in the child1.contoso.com domain.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. Upgrade DC1 to Windows Server 2012 R2.

B. Upgrade DC11 to Windows Server 2012 R2.

C. Raise the domain functional level of childl.contoso.com.

D. Raise the domain functional level of contoso.com.

E. Raise the forest functional level of contoso.com.

Answer: A, D

You have an enterprise certification authority (CA) named CA1. You configure a recovery agent for CA1.On CA1, you create a new certificate template named CertTemplate1, and then you configure CA1 to allow certificates to be requested based on CertTemplate1.You need to ensure that new certificates issued based on CertTemplate1 can be recovered.What should you do?

A. the Certification Authority console, modify the enrollment agents of CA1.

B. From the Certification Authority console, modify the enrollment managers of CA1.

C. From the Certification Templates console, modify the Issuance Requirements setting of CertTemplate1.

D. From the Certification Templates console, modify the Request Handling setting of CertTemplate1.

Answer: C

Your network contains two DNS servers named DNS1 and DNS2 that run Windows Server 2012 R2. DNS1 has a primary zone named contoso.com. DNS2 has a secondary copy of the contoso.com zone. You need to log the zone transfer packets sent between DNS1 and DNS2.

What should you configure?

A. Monitoring from DNS Manager

B. Logging from Windows Firewall with Advanced Security

C. A Data Collector Set (DCS) from Performance Monitor

D. Debug logging from DNS Manager

Answer: D

Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Both servers have the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connect to each other by using a high-latency WAN link. Server2 hosts a virtual machine named VM1. You need to ensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs.

What should you do?

A. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.

B. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for VM1.

C. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.

D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for VM1.

Answer: D

Your network contains two Web servers named Server1 and Server2. Both servers run Windows Server 2012 R2. Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster contains an application named App1 that is accessed by using the URL http://app1.contoso.com . You plan to perform maintenance on Server1. You need to ensure that all new connections to App1 are directed to Server2. The solution must not disconnect the existing connections to Server1.

What should you run?

A. The Set-NlbCluster cmdlet

B. The Set-NlbClusterNode cmdlet

C. The Stop-NlbCluster cmdlet

D. The Stop-NlbClusterNode cmdlet

Answer: D

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as an enterprise certification authority (CA).

You need to ensure that all of the users in the domain are issued a certificate that can be used for the following purposes:

• Email security

• Client authentication

• Encrypting File System (EFS)

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. From a Group Policy, configure the Certificate Services Client ¨C Auto-Enrollment settings.

B. From a Group Policy, configure the Certificate Services Client ¨C Certificate Enrollment Policy settings.

C. Modify the properties of the User certificate template, and then publish the template.

D. Duplicate the User certificate template, and then publish the template.

E. From a Group Policy, configure the Automatic Certificate Request Settings settings.

Answer: A, D

You have a server named Server1 that runs Windows Server 2012 R2. Each day, Server1 is backed up fully to an external disk. On Server1, the disk that contains the operating system fails. You replace the failed disk. You need to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (Windows RE).

What should you do?

A. Run the Start-WBVolumeRecovery cmdlet and specify the -backupset parameter.

B. Run the Get-WBBareMetalRecovery cmdlet and specify the -policy parameter.

C. Run the wbadmin.exe start recovery command and specify the -recoverytarget parameter.

D. Run the wbadmin.exe start sysrecovery command and specify the -backuptarget parameter.

Answer: D

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server role installed.

DHCP is configured as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that only Scope1, Scope3, and Scope5 assign the same DNS servers to DHCP clients. The solution must minimize administrative effort.

What should you do?

A. Create a superscope and scope-level policies.

B. Configure the Scope Options.

C. Create a superscope and a filter.

D. Configure the Server Options.

Answer: B

You have a server named LON-DC1 that runs Windows Server 2012 R2.

An iSCSI virtual disk named VirtualiSCSI1.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)

You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target. VirtualiSCSIl.vhd is removed from LON-DC1. You need to assign VirtualiSCSI2.vhd a logical unit value of 0.

What should you do?

A. Modify the properties of the itgt ISCSI target.

B. Modify the properties of the VirtualiSCSI2.vhd iSCSI virtual disk.

C. Run the Set-VirtualDisk cmdlet and specify the -Uniqueld parameter.

D. Run the iscsicli command and specify the reportluns parameter.

Answer: B

Microsoft認証は全世界IT認証分野での最も人気のある認証の一つとして、70-412試験参考書に合格して取った Microsoftの合格証明書を取得し、中規模のIT企業に応募するための踏み台にすることができます。データによると、世界の有名なIT会社は関連認証証明書を備えた求職者を雇用しがちです。それと同に、Windows Server 2012資格に合格すれば、受験者の収入水準を大いに上げられます。KilltestのMicrosoft70-412試験問題集には、PDF版およびソフトウェア版のバージョンがあります。それは勉強者に最大の利便性を与えることができます。いつでもどこでも問題を学ぶことができるために、勉強者はPDF版の問題集をダウンロードしてプリントアウトすることができます。そして、Configuring Advanced Windows Server 2012 Services問題集は実際試験の雰囲気を感じさせることができます。そうすると、受験するとき、気楽に勉強者は試験を対処することができます。