HP Aruba Certified Switching Associate (ACSA) HPE6-A41 問題集

IT認定試験に関連する資料を提供するプロなウェブサイトとして、Killtestはずっと受験生に優秀な試験参考書を提供し、数え切れない人を助けました。KilltestのHPE6-A41試験問題集は勉強者に試験に合格する自信を与えて、楽に試験を受けさせます。このApplying Aruba Switching Fundamentals for Mobility試験問題集を利用して短時間の準備だけで試験に合格することができますよ。不思議でしょう。しかし、これは本当なことです。この問題集を利用する限り、Killtestは奇跡を見せることができます。ところで、もし受験者が試験に受からなだったら、HPE6-A41の注文した料金を返金すること ができます。Killtestの試験問題集を選択してみましょう。

KilltestはAruba Certified Switching Associate (ACSA)認定資格HPE6-A41試験参考書を提供しております。高品質、そしてHP実試験の雰囲気により近づき、HPE6-A41試験問題を体験できるようにHPE6-A41問題集を作成しています。オンライン受講のほかに、携帯での受講、オフラインのpdfダウンロード、フォーラム、チャートなど多彩な機能をご利用いただけます。Killtestプラットフォームはインタラクティブな活動の異なるタイプをサポートし、アイデアを接続するか、その過程を通じて埋め込ま自分の研究室の活動、それを試してみてください。これらのインタラクティブな活動が従事して学習者を保持し、学習を楽しくなります。
Share some Aruba Certified Switching Associate (ACSA) HPE6-A41 exam questions and answers below.
Refer to the Exhibit:

All switches are ArubaOS switches that currently have the default spanning tree priority. Switch-1 should be the root of the spanning tree If Switch-1 fails. Switch-2 should become root

Which configuration for spanning tree priorities ensures this behavior?

A. priority 15 on Switch-1 and priority 14 on Switch-2

B. priority 0 on Switch-1 and priority 15 on Switch-2

C. priority 0 on Switch-1 and priority 1 on Switch-2

D. priority 15 on Switch-1 and priority 9 on Switch-2

Answer: C

An ArubaOs switch has no passwords configured on it.

The network administrator then enters these commands:

Switch(config)# password cperator user-name admin1 plaintext mysecret1

Switch(config)# password manager user-name admin2 plaintext mysecret2

What is one task that the admin 1 user can log in to the switch and complete?

A. Mew interface status and statistics.

B. Back up a configuration.

C. Mew configuration files.

D. Enable an interface.

Answer: A

Refer to the Exhibit:

Exhibit 2 shows the IP routine tables for all the switches after the link between Switch-4 and Switch-2 failed ‘//’hen This link fails traffic between 10 1 3 0/24 and 10.1.2.0724 is disrupted

What should the network administrator do to ensure that this traffic continues to flow if this link fails in the future? (Assume that routes on Switch-1 and Switch-3 are correct.)

A. Add a route to 10.1.3.0/24 through 10.1.3 1 on Switch-4.

B. Add a route to 10.1.2.0/24 through 10.1.0.14 on Switch-2.

C. Add a route to 10.1.3.0/24 through 10.1.0.14 on Switch-2

D. Add a route to 10.1.2 0/24 through 10.1.2.1 on Switch-4.

Answer: C

A company has a cluster of Aruba Instant APs (IAPs). The company wants to add a new IAP to the cluster.

What should network administrators ensure before they connect the new IAP?

A. that the new IAP has been provisioned with an IP address and the IP address of the cluster virtual controller (VC)

B. that the switch port for the AP is untagged for the same VLAN as the current cluster

C. that Aruba Activate is configured with provisioning rules for the IAP

D. that the DHCP server has the correct options 60 and 43

Answer: B

Refer to the Exhibit:

How can the network administrator find the interface that Switch-3 uses to forward traffic from the Client to the Server?

A. View the MAC forwarding table.

B. View the LLDP remote devices list.

C. View the IP routing table.

D. View the ARP table.

Answer: A

On an ArubaOS switch, what is the difference between an SNMPv2c community with manager unrestricted rights and an SNMPv2 community with operator unrestricted rights?

A. The manager unrestricted community has read-write access to all managed objects on the switch; the operator unrestricted community has read-write access to some objects but not to any Config objects.

B. The manager unrestricted community uses the Telnet/SSH password assigned to the manager to authenticate SNMP servers: the operator unrestricted community uses the Telnet/SSH password assigned to the operator.

C. The manager unrestricted community has read-write access to the switch, but the operator unrestricted community has read-only access.

D. The manager unrestricted community uses encryption, but the operator unrestricted community uses plaintext communication

Answer: A

What is one reason to configure a dynamic LACP link aggregation instead of a static link aggregation?

A. so that the link aggregation automatically chooses its operational key

B. so that the link aggregation can detect the system ID and operational key on the other side of each link

C. so that the link aggregation can automatically change a passive LACP interface to active mode

D. so that the link aggregation can include more interfaces with some interfaces on standby

Answer: D

Refer to the Exhibit:

What is the result of this configuration?

A. The switch only adds the last static route entry to the routing table

B. All four routes are added to the routing table, but are never used.

C. The switch load shares connections across the four static next hops.

D. The switch only adds the last two static route entries to the routing table.

Answer: C

A network administrator suspects that interfaces in a link aggregation have been accidentally connected to multiple switches. The administrator wants to find the hostnames of the switches on the other side of the interfaces.

How can the administrator find this information?

A. Use the show lace command to view LACP information.

B. Use the show trunks command to view link aggregation information.

C. Use the show interface command to view detailed interface status.

D. Use the show lldp info remote-device command to view LLDP information.

Answer: D

Refer to the Exhibit:

The switches in the exhibit use RSTP. The network administrator needs to add Link 2.

Why should the administrator configure Links 1 and 2 as a link aggregation?

A. to combine traffic statistics for the interfaces

B. to prevent a loop from occurring

C. to share traffic more evenly over both links

D. to automatically apply the settings already configured for Link 1 to Link 2

Answer: C

Killtestの試験問題集を利用したら、勉強者はきっと自分の理想を実現することができます。KilltestAruba Certified Switching Associate (ACSA)認定HPE6-A41試験参考書は大きな変更がなく、一度習得すれば長期に渡りその技術を活かすことができます。Applying Aruba Switching Fundamentals for Mobility試験を取得するには、Aruba Certified Switching Associate (ACSA)資格の要件をしっかりと理解する必要があります。IT資格を選んだ勉強者は現状に自己満足することはきっとないですね。現在、どの業種の競争でも激しくなっていて、IT資格も例外ないですから、目標を立ったら勇気を持って目標を達成するために頑張るべきです。その中で、HPのKilltest試験問題集に受かることも競争力があるモードです。HPE6-A41試験に合格したら、勉強者のITキャリアには明るい未来があるようになります。